PYPLOK Fittings

Pyplok Mechanically Attached Fitting System is the best alternative to threaded, welded, or brazed joints. The Pyplok® system incorporates an external swaging process as a way of joining pipe ends together. The external radial swaging process compresses the fitting onto the pipe or tube, which results in a permanent, leak-tight joint.
-There is no need to purge or flush the piping system of gas or liquid because the application of Pyplok® requires no hot work. In other words, Pyplok® allows for a "cold system".
-The time required to join the pipe ends together is significantly shorter because of the portable tools used to compress the fitting onto the pipe.
-Reduced inspection time through a go-no-go gauge, which checks for proper swaged diameter to determine satisfactory compression of the fitting. This eliminates the need for conventional NDT requirements such as X-rays etc.
-There is no need for fire watch or any special fire permit which are needed for welding or brazing, as there are no fumes or fire hazards when using the Pyplok® application.

With all the advantages listed above, Pyplok® is certainly the most economical and efficient way of joining pipes. It dramatically reduces costs, greatly enhances quality, significantly improves safety conditions and reliability of the completed joint.